The cleanroom vacuum autoclavacable.

• New Generation cleanroom vacuum system for dry recovery only
• Designed specifically for the Pharmaceutical, Semiconductor and Microelectronics industries
• Compatible with ISO Class 4 cleanroom conditions as defined in ISO 14644-1 (Class 10 as per FED STD 209E)
• Complete stainless steel construction with electropolished finish to remove surface contamination. Recovery tank and wheels are autoclavable up to 121°C
• Powerful suction and quiet operation
• Helps to comply with GMP standards
• Each vacuum is aerosol leak tested before leaving the factory
• Multiple stages filtration system. Simple and reliable filter change
• Equipped with an upstream HEPA filter and a downstream ULPA filter. HEPA filter is H14 as per EN 1822. ULPA filter is U15 as per EN 1822. The upstream HEPA protects the motor and prevents ultra fine particles from entering. The ULPA filter is installed at the exhaust to ensure cleanroom compatibility
• ULPA filter with an efficiency of 99.999% at 0.12 micron. Filtration efficiency of 99.9995% at 0.18 micron. Tested IEST-RP-CC001 - included
• HEPA filter with an efficiency of 99.995% at 0.3 micron. Tested IEST-RP-CC001 - included
• The primary filters consist of a disposable collection bag and a primary filter made of polyester. Filtration Class M as per IEC 60335-2-69
• Equipped with a filter blockage indicator light to know when the recovery bag is full
• The recovery tank is made of stainless steel Type 316 and is fully autoclavable (up to 121°C) including the white nylon wheels. 

The CR-1200 D cleanroom vacuum cleaner is a new-generation cleanroom vacuum cleaner for dry recovery. It was specially developed for the pharmaceutical, semiconductor, and microelectronics industries. It features a complete stainless steel construction with an electropolished surface for removing surface contaminants. It is also autoclavable up to 121°C (except for the drive head).

Material & Properties

• Material: stainless steel
• Length: 410 mm
• Width: 380 mm
• Height: 710 mm
• Weight: 16 kg
• Power cord length: 10.6 m
• Power: 1000 W
• Air flow: 204 m³/h
• Vacuum pressure: 2410 mm H₂O
• Power plug: European
• Suction nozzle: 38 mm
• Dry recovery container: 9.8 l
• Dry recovery bag: 9.5 l
• ISO 4 cleanroom conditions in accordance with ISO 14644-1
• Stainless steel construction with electropolished surface for removal of surface contaminants
• Autoclavable up to 121°C (except drive head).
• Strong suction power and quiet operation
• Complies with GMP standards
• Each aspirator is tested for aerosols before leaving the factory
• Multi-stage filter system. Easy and reliable filter replacement
• Equipped with an upstream HEPA filter and a downstream ULPA filter. HEPA filter is H14 according to EN 1822. ULPA filter is U15 according to EN 1822. The upstream HEPA filter protects the Motor.